HXPC-200A DR Panel Detector Pipeline Outer Wall Crawler System
1. General introduction
(1) Equipment brand: HUATEC
(2) Model: HXPC-200A
(3) Travel speed: ≥100mm/s;
(4) The walking mode adopts the track type to ensure the vertical
orientation of the weld: ±1mm, the walking direction orientation
Accuracy: ±1mm;
(5) It can meet the driving requirements of double-wall
single-shadow directional ray machine for pipelines with a diameter
of less than 1600mm;
(6) Use 5G dual-band wireless communication system, control
distance: 100 meters (open land);
(7) The use of 36V integrated low-temperature lithium battery power
supply, easy to replace, can work normally at minus 40℃;
(8) Working hours: more than 8 hours;
(9) Power consumption: ≤150W;
(10) Synchronous drive with the tube wall climbing vehicle (flat
scanner) to complete the double-wall single-shadow DR
Transillumination detection requirements
2. Portable X ray flaw detector
Equipment name: portable high frequency constant pressure X-ray
flaw detection machine
| Model | XXG 300JYGF |
| X-ray tube | metal ceramic tube |
| X-ray tube power supply mode | constant voltage |
| X-ray tube voltage regulation range | 50-300kV |
| Tube voltage regulation step | 1kV/step |
| X-ray tube current | 0.5-3.0mA |
| Tube current regulation step | 0.1mA/step |
| Maximum exposure time | 99 minutes 59 seconds |
| Delay high pressure adjustment range | 0-99 seconds |
| Maximum power of X-ray tube | 900W |
| Operating frequency | 100kHz |
| Focus size | AC.EN12543 d=3.0mm (AC.IEC 336 1.5mm) |
| Penetration thickness | 65mm (A3 steel, focal length 700mm, HUATEC D7 film, negative black
≥2.0, 10Minutes) |
| Temporary load rate | 100% (at ambient temperature of 20℃, maximum power conditions) |
| Radiation Angle | 40°x 55° |
| Internal filter | 1mmBe |
| Additional filter | 4mm Alequivalent |
| Pipe head size | φ295mmx775mm (including end ring) |
| Tube head weight | 29kg |
| Connection cable | 50M |
| Power cable | 10M |
| Controller size | 465mmx154mmx323mm |
| Weight of controller | 11.3kg |
| Input power | 200-250VAC, 47-400Hz |
| Anode cooling method | forced air cooling |
| Allowable ambient temperature | -20℃~+40℃ |
3. Standard accessories include:
DR panel detector pipe outer wall climbing machine
X ray machine pipe outer wall climbing machine
Digital flat detector 1024,76μm,image area 233 x 97mm
Digital image acquisition and processing software
Laptop computer
High frequency constant pressure X ray flaw detector (directional)
Crawler guide rail(Customized according to customer requirements):
Ø813mm, Ø1016mm, Ø1219mm, Ø1422mm 4pcs.
