Use 5G Dual-Band Wireless Communication System Control Distance 100
Meters Pipeline Outer Wall Crawler System
1. General introduction
(1) Equipment brand: HUATEC
(2) Model: HXPC-200A
(3) Travel speed: ≥100mm/s;
(4) The walking mode adopts the track type to ensure the vertical
orientation of the weld: ±1mm, the walking direction orientation
Accuracy: ±1mm;
(5) It can meet the driving requirements of double-wall
single-shadow directional ray machine for pipelines with a diameter
of less than 1600mm;
(6) Use 5G dual-band wireless
communication system, control distance: 100 meters (open land);
(7) The use of 36V integrated low-temperature lithium battery power
supply, easy to replace, can work normally at minus 40℃;
(8) Working hours: more than 8 hours;
(9) Power consumption: ≤150W;
(10) Synchronous drive with the tube wall climbing vehicle (flat
scanner) to complete the double-wall single-shadow DR
Transillumination detection requirements
2. Portable X ray flaw detector
(1) Equipment name: portable high frequency constant pressure X-ray
flaw detection machine
(2) Model: XXG 300JYGF
(3) X-ray tube: metal ceramic tube
(4) X-ray tube power supply mode: constant voltage
(5) X-ray tube voltage regulation range: 50-300kV
(6) Tube voltage regulation step: 1kV/step
(7) X-ray tube current: 0.5-3.0mA
(8) Tube current regulation step: 0.1mA/step
(9) Maximum exposure time: 99 minutes 59 seconds
(10) Delay high pressure adjustment range: 0-99 seconds
(11) Maximum power of X-ray tube: 900W
(12) Operating frequency: 100kHz
(13) Focus size: AC.EN12543 d=3.0mm (AC.IEC 336 1.5mm)
(14) Penetration thickness: 65mm (A3 steel, focal length 700mm,
HUATEC D7 film, negative black ≥2.0, 10
Minutes)
(15) Temporary load rate: 100% (at ambient temperature of 20℃,
maximum power conditions)
(16) Radiation Angle: 40°x 55°
(17) Internal filter: 1mmBe
(18) Additional filter: 4mm Alequivalent
(19) Pipe head size: φ295mmx775mm (including end ring)
(20) Tube head weight: 29kg
(21) Connection cable: 50M
(22) Power cable: 10M
(23) Controller size: 465mmx154mmx323mm
(24) Weight of controller: 11.3kg
(25) Input power: 200-250VAC, 47-400Hz
(26) Anode cooling method: forced air cooling
(27) Allowable ambient temperature: -20℃~+40℃
3. Standard accessories include:
DR panel detector pipe outer wall climbing machine
X ray machine pipe outer wall climbing machine
Digital flat detector 1024,76μm,image area 233 x 97mm
Digital image acquisition and processing software
Laptop computer
High frequency constant pressure X ray flaw detector (directional)
Crawler guide rail: Ø813mm, Ø1016mm, Ø1219mm, Ø1422mm 4pcs.
