Underground pipe locator and porosity detector HD-150
HD-150 Embedding Pipe Outer Antisepsis status Inspecting Instrument is
easy to operate. The reliability and detecting veracity have been greatly
increased. Without dredging up the soil, this instrument can detect
conveniently and accurately the position, directions, depth, leaking points. It is
one of the most advanced instruments in China. It's the necessity of pipe laying,
chemical ect.
Instrument Introduction
1. Instrument trait
(1) This instrument uses complanation design, keyboard operating,
it also improves the reliability in the field using.
(2) Adopting all digital filter, it can set the range of leaking
points, record the number of leaking points automatically. It aslo shows the distance
between the points.
(3) This instrument has two ways on detecting peak value and zero
value, it also changes automatically. It will power off when the low batteries of
sending set. It will send remind signal to receiving set automatically. It will save the data
when it powers off.
(4) This instrument can detect the resistance between the pipe and
terra, outputting signal to modulate the alarm, the anti-jamming will be enhanced.
Sending set will adjust automatically with the detecting distance. It will power off
automatically after detecting. It markedly saves the resouce.
2. Instrument system introduction
HD-150 Embedding Pipe Outer Antisepsis status Inspecting Instrument mainly
include sending set, detecting instrument, leak hunting instrument and
other accessories. This instrument uses complanation design, it's moistureproof and
dustproof, it also improves the reliability in the field using.
(1) Sending set function: It's used to send specifically frequency
Hertzian waves, it's usually usedwith receiving set. It can detect conveniently and
accuratelythe position, directions, depth,leeking points.
(2) Detecting instrument function: Detecting instrument is used in
detecting pipe position, directions, depth. It also can detect the pipe length with the
diatance calculating instrument .
Technical parameters
(1) Sending set parameters
| Output power | 25W, adjust automatically |
| Way to to send signals | modulating signal |
| Output impedance matching | 0-500(Ω) , automatically matching |
| Sending distance | 0.03-5km |
| Power | 12v pile |
| Working temperature | 10c- 50c |
| Weight | 3kg |
| Size | 276*227*98mm |
(2) Detecting instrument parameters
1. Position windage: <5cm
2. Detcting range: < 6m
3. Diatance calculating precision: <0.1% of detecting distance
4. Power: 9.6V charging pile
5. Working temperature: -10c- 50c
6.Size: 165*110*68mm
(3) Leak hunting instrument parameters
1. Leak hunting precision: >0.5mm2
2. Power: 9.6V charging pile
3. Working temperature: -10c- 50c
4. Size: 165*110*68mm
