Coulometric Thickness Tester Metal Coating Thickness Gauge
Electrolytic Thickness Gauge
TG-100D coulometric thickness gauge, using anode dissolution
coulomb method, conforms to ISO2177 standard. It can measure
chromium, nickel, copper, zinc, tin, silver, gold, cadmium and
other metal coatings, nickel alloy coatings, composite coatings
(such as Cr/Ni/Cu) and multilayer nickel coatings.
1. Product use: measurement of plating thickness
2. Application field:
The electrolytic thickness gauge adopts the principle of Coulomb
method to measure the thickness of the coating, so it is also
called Coulomb method thickness gauge or electrolytic thickness
gauge. It is an ideal instrument for measuring various single metal
coatings and multi-metal coatings on metal (such as steel, copper,
zinc alloy or non-metal (such as plastic, neodymium iron boron)
substrates. It is widely used in the following industries:
automobiles, motorcycles, Bicycles, sports equipment, aerospace and
navigation, electronic appliances, high and low voltage switches,
household hardware, sanitary ware, kitchenware, plastic plating,
standard rooms, NdFeB, security products, cables and other
industries, technical supervision departments and scientific
research institutions .
3. Specific applications:
Such as mobile phone and camera buttons, car knobs, hardware tools,
electronic and electrical parts, showers, faucets, shelves, sports
equipment, bicycles, standard parts, kitchen supplies, toilet
supplies, locks, door handles, car signs, doors Cabinet
accessories, motorcycle brackets, mufflers, car signs, wind grills,
car door locks, car handles, car interior parts, connectors, wires,
welding wires, neodymium iron boron plating, etc. are used in
automobiles, motorcycles, sanitary ware and other industries The
STEP function is measured simultaneously to the thickness and
potential difference of multilayer nickel. At this time, use TG-G
electrolytic thickness gauge to complete.
Measuring plating species: standard configuration: it can measure
chromium, nickel, copper, zinc, tin, silver, gold and other metal
plating, composite plating (such as Cr/Ni/Cu) about 20 kinds of
plating/matrix combinations. If you need to measure other coatings,
please ask in advance.
4. Technical specification
| Coating substrate | metal, non-metal |
| Number of coating layers | single layer and multiple layers |
| Test size | φ2.4mm (B type test rubber ring) or φ1.7mm (S type test rubber
ring) |
| Measuring range | 0.1～35μm (Under the condition of ensuring accuracy, thicker coating
can also be measured, the error will gradually become larger) |
| Indication error | ≤±10% |
| Resolution | gold, decorative chromium 0.01μm; other plating species 0.1μm |
| Power source | AC 220V±10%, 50/60Hz, 30W |
| Host size | 210 (W) × 360 (D) × 85 (H) mm |
5. Standard delivery:
1 host,
1 test stand,
1 cleaning bottle,
1 waste bottle,
10 straws,
1 eraser,
1 tweezers,
1 pack of paper towels,
1 power cord,
1 accessory disk,
1 manual,
1 warranty card,
1 certificate
6. Options accessories:
STD-L wire test stand, STD-08 test stand, imported 250ml pipette
bottle, imported 250ml suction bottle, imported plating calibration
board
