Pen type integrated with D probe rechargeable battery Integrated Hardness Tester

1 General Description

1.1 Features

l All English menu display is easy to manipulate. High definition OLED display for better use in any environments.

l With Micro-USB port, it provides a faster communication speed.

l Large capacity memory could store 373~2688 groups (impact average times32~1 ) information including single measured value, mean value, testing date, impact direction, impact times, material and hardness scale etc.

l Conversion to tensile strength(U.T.S).

l For all metallic materials.

l Provide software calibration function.

l High-performance Li battery with charging circuit. The battery sign display the current remaining capacity.

l Dataview software is equipped to meet the higher demands in quality assurance, activities and management.

1.2 Main Application and Testing Range

1.2.1 Main Application

l The assembled machinery and permanently installed parts

l Die cavity of molds

l Heavy work piece

l Failure analysis of pressure vessel, steam turbo-generator set and other equipment

l Narrow testing space where work piece installed

l Bearings and other parts

l Cases which require the test result with normalized original recording

l Material identification of the metal material warehouse

l Quick tests of large range and multipoint measuring positions for heavy workpiece

1.2.2 Testing Range

Testing range see Appendix 1 and Appendix 2.

1.3 Types and specification

1.3.1 Standard Delivery

Main unit: 1

Small supporting ring: 1

Nylon brush : 1

High value Leeb test block: 1

Charger: 1

Data Processing Software (used with computer): 1

Communication cable: 1

1.3.2 Optional Delivery

Except the standard delivery, additional Optional Delivery can be selected by users according to their requirements: Various non-conventional type of impact devices and supporting ring, see Appendix 3 and Appendix 4.

1.4 Operating conditions:

l Ambient temperature: 0℃~40℃;

l Relative humidity: ≤90%;

l No vibration, no strong magnetic field and no corrosive medium and heavy dust in ambient environment.

3 Technical capabilities

3.1 Specifications

Measuring device type: D, DL, DC, D+15 or C

Measuring device feature:

Accuracy and repeatability of displayed value:

Measuring range: HLD(170~960)HLD

Measuring direction: 360°

Hardness scale: HL, HB, HRB, HRC, HRA, HV, HS

Display: OLED, 128×36 dot matrix

Data memory: 373~2688 groups (impact times: 32~1)

Range of upper and lower limit: the same as measuring range

Charging time: 1.5 ~ 2h

Power supply for charging: 5V/500mA

Continuous working period: approx. 30h

Standard communication interface: USB,Bluetooth

Outline dimensions:145 × 33 × 28mm

Wight: 95g

6.5 Software calibration

The tester and impact device must be calibrated with a standard Leeb hardness test block prior to the first use, or reusing after a long term idle.

Press key as well as key at the same time to enter the interface of software calibration. The impact times is set to 5. And the impact direction should be vertically down on the Leeb hardness test block.

Average value will be showed after measuring. Press or key to input nominal value. Press key to finish calibration and back to the main unit,press key to cancel;

Note: calibration range is ±15HL.